PARTS LIST:
Grand-Son of Woodstock:
Kindly let me know if I missed anything or had some incorrect quantities
Due to the complexity of this project it is advised to have a serious talk with Tony in advance so that the fittings and special parts required end up being correct.
Added note: all yards listed are approximate guesstimates
· 3/4 oz ripstop nylon - 10 yds
· 3/4 oz 1” edge binding FSR7510 - 50 yds
· 2.9 oz insignia FIC10 - 3 yds
· 3.9 oz dacron x 2” DAC20 - 10 yds
· 3.9 oz dacron x 1” DAC05 - 2 yds
· 1/2” nylon (pockets & loops) WEB650 - 10 yds
· 1/4” nylon (Gibian loops) WEB625 - 5 yds
· 3 main longerons & 1 spine - 7 (RLG2100) & 1 (RLG2100L) linear graphite sticks
· Fore & Aft cross sticks - 11 (RLG2100), 3 (RLG2100L), & 1 (RLG2540) linear graphite sticks
· Misc. sticks - 2 (RET20) epoxy tube for ferrels & 1 (RSFA09) solid fiberglass to fill in 2100 ends
· Rotators - 6 (RLG1570), 12 (RLG1250) linear graphite, & 5 (RSG09) solid micro carbon
· Whiskers - 6 (RSG09) solid micro carbon
· Vinyl End Caps - 2 (VEC210) & 12 (VEC250) for spine, and 24 (VEC090) for whiskers
· 1/4” Aluminum washers - 12 for spine from the “Old Man’s stock” (call for)
· Special Bobby 2100 one hole adjusters - 8 (call for special order)
· Tinkertoys - 2-3/4”, 2-1”, 1-1 1/2”, & 1-2” (call for special order)
· Clear Plastic Tubing - 2 feet of TCP06 for whiskers
· See fitting plans for description and list of special screw style adjustable fittings required for the 4 wing and 6 longeron stick ends (call for special order)
· Bead Tensioners - 10 (CBEAD10) for large rotator longerons, bottom main longeron, & 3 corners
· APA connectors - 2 (CLEAPA2122) for tail horizontal stick
· Machined Pushers - 1 UHMW pusher for a 2100 stick x A20 cross hole (fore) & 1 UHMW pusher for a 2540 stick x A20 cross hole (aft)
· Gibian style short end caps for the 3 fore cell corners - 3 (MNCAS2100)
· Oak Tag for patterns - 5 yds (OAK48)
· Spray Glue - #75 repositionable 2 cans (GLU10), & Design Master for bindings 3 cans (GLU20)
· Dacron Line: 250# for bridel (LDAA250), 100# for 3 corner tensioners & bottom longeron tensioner (LDAA100), & 50# for large rotator tensioners (LDAA50)